Response of parylene-coated NaI(Tl) scintillators at low temperature
Resumen: Despite that it is widely used as a scintillator at room temperature, the hygroscopicity of NaI complicates its handling and limits its application for many purposes, for example as a cryogenic detector. To overcome this problem we study coating materials that can act as humidity barriers, in particular parylene, a polymer that can be deposited in very radiopure, thin and conformal layers. In this work, several NaI(Tl) samples coated with 2-5 µm parylene-C were tested at low temperature. Luminescence spectra under X-ray excitation are presented at several temperatures as well as the light output vs temperature at 1.5-300 K. Several thermoluminescence peaks were observed at around 60, 95 and 150 K during warm up to room temperature
The mechanical resistance of the coating under thermal cycles was also investigated, and we observed a degradation of the optical appearance and the light output after cooling down to about 100 mK, which compromises the reusability of the samples.

Idioma: Inglés
DOI: 10.1051/epjconf/20136502001
Año: 2014
Publicado en: EPJ web of conferences 65 (2014), [4 pp]
ISSN: 2101-6275

Financiación: info:eu-repo/grantAgreement/ES/MICINN/FPI-CSD2009-00064
Tipo y forma: Article (Published version)
Área (Departamento): Área Física Teórica (Dpto. Física Teórica)
Área (Departamento): Área Física Atóm.Molec.y Nucl. (Dpto. Física Teórica)


Creative Commons You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.


Exportado de SIDERAL (2019-07-09-11:24:53)


Visitas y descargas

Este artículo se encuentra en las siguientes colecciones:
Articles



 Record created 2015-11-05, last modified 2019-07-09


Versión publicada:
 PDF
Rate this document:

Rate this document:
1
2
3
 
(Not yet reviewed)