Experimental full scale tests on vortex generators for heavy vehicles drag reduction
Resumen: This article details the analysis of experimental tests regarding the behavior of some vortex generators (VGs) for heavy vehicles. The correlation between numerical and experimental tests, including road tests, smoke and water jet tests, etc. will be highlighted.
Two types of vortex generators have been tested, from which high decreases in the drag coefficient in the virtual tests by means of CFD tools were obtained. These vortex generators, are one co-rotational with blade shape VG and the other one with a complex geometry, manufactured by the Air Tab Company.
On the other hand, some new low-cost experimental tests have been planned. They do not include the use of a wind tunnel. It has also been necessary to build some functional prototypes of the VGs. It must be highlighted that the use of these types of tests stems from the need to obtain experimental test results to be compared with the numerical results. It must also be pointed out that, due to their high costs, wind tunnel tests have not been conducted to validate the numerical results. However, road test results have proved useful in obtaining the behavior and aerodynamic improvements of the VGs.

Idioma: Español
DOI: 10.6036/8321
Año: 2018
Publicado en: DYNA 93 (2018), 96-101
ISSN: 0012-7361

Factor impacto JCR: 0.562 (2018)
Categ. JCR: ENGINEERING, MULTIDISCIPLINARY rank: 82 / 88 = 0.932 (2018) - Q4 - T3
Factor impacto SCIMAGO:

Tipo y forma: Artículo (Versión definitiva)
Área (Departamento): Área Expresión Gráfica en Ing. (Dpto. Ingeniería Diseño Fabri.)

Derechos Reservados Derechos reservados por el editor de la revista

Exportado de SIDERAL (2019-07-09-12:06:50)

Este artículo se encuentra en las siguientes colecciones:
Artículos > Artículos por área > Expresión Gráfica de la Ingeniería

 Registro creado el 2018-01-22, última modificación el 2019-07-09

Versión publicada:
Valore este documento:

Rate this document:
(Sin ninguna reseña)