Energy rehabilitation of ventilated faÇades using phenolic panelling at the university of Alicante museum: Thermal characterisation and energy demand
Resumen: In the 1990s, phenolic panels made from Bakelite-finished wood were given a 1 mm-thick finishing layer of natural wood, which was protected by a film of waterproof paper. The edges were protected with the same type of phenolic resins. In practice, a gradual deterioration of the protective layer occurred due to the combined action of UV rays and rainwater. When the wood lost its protective layer, it expanded, deformed and acquired whitish stains due to the action of microorganisms. The edges suffered similar deterioration processes. We present a sample of the damage at a museum. The deterioration of the panels was worsened by their incorrect positioning during construction. A type of sandwich was made, with phenolic panel on the exterior, then rock wool insulation and MDF wood panels. This was given rigidity using wooden frames. When thermal bridges occurred due to gaps in the insulation, this gave rise to differences in surface washing which worsened the outside appearance. Once a diagnosis of the damage had been arrived at, energy rehabilitation of the covering was carried out, which involved putting in new-generation phenolic panels with a non-degradable acrylic layers and edges protected using synthetic resins. These were fitted on top of the pre-existing panels using threaded rods and a 3 cm layer of polyurethane insulation was sprayed over the whole surface. Furthermore, air has been allowed to circulate, as in a ventilated façade. This avoids any possible continuous damp problems and at the same time, in summer, avoids heat building up due to the solar radiation. The building was monitored over a full, year-round cycle which allowed us to learn about its energy performance using Design Builder software, which had been calibrated using temperature adjustments and real energy consumption data. We present the results, which show the reduction in the building energy demand.
Idioma: Inglés
DOI: 10.2495/STR170011
Año: 2017
Publicado en: WIT Transactions on The Built Environment. Sustainable Development 171 (2017), 3-15
ISSN: 1746-4498

Tipo y forma: Artículo (Versión definitiva)
Área (Departamento): Area Construc. Arquitectónicas (Unidad Predepartam. Arquitect.)

Creative Commons Debe reconocer adecuadamente la autoría, proporcionar un enlace a la licencia e indicar si se han realizado cambios. Puede hacerlo de cualquier manera razonable, pero no de una manera que sugiera que tiene el apoyo del licenciador o lo recibe por el uso que hace.

Exportado de SIDERAL (2018-07-19-08:05:30)

Este artículo se encuentra en las siguientes colecciones:

 Registro creado el 2018-04-13, última modificación el 2018-07-19

Versión publicada:
Valore este documento:

Rate this document:
(Sin ninguna reseña)