CLOU process performance with a Cu-Mn oxygen carrier in the combustion of different types of coal with CO2 capture
Resumen: The Chemical Looping with Oxygen Uncoupling (CLOU) process is a Chemical Looping Combustion (CLC) technology that allows the combustion of solid fuels with inherent CO2 separation by using oxygen carriers based on metal oxides. This technology has a low energy penalty and thus low CO2 capture costs. The oxygen carrier used in the CLOU process must be able to release gaseous oxygen, an aspect that limits the availability of metal oxides for this process. This work investigated the suitability of an oxygen carrier containing 34 wt% CuO and 66 wt% Mn-3 O-4 (active phase Cu1.5Mn1.5O4) prepared by granulation regarding the CO2 capture, combustion efficiency and lifetime of the particles. The effect of the different types of coal (two sub-bituminous and a lignite) on combustion and CO2 capture efficiencies by CLOU was studied at different oxygen carrier to coal ratios in a continuous 1.5 kWth rig. It was found that full combustion could be reached regardless of the coal used. However, CO2 capture efficiencies were highly determined by coal rank. Finally, it was found that working with oxygen carrier to coal ratios higher than phi = 4, which corresponded to values of the variation of the oxygen carrier conversion lower than Delta X-oc = 0.25, decreased the effect of chemical stress on the attrition rate. Therefore, it is clearly beneficial for the lifetime of oxygen carrier particles to operate with low variations of the oxygen carrier conversion (Delta X-oc) between fuel and air reactors.
Idioma: Inglés
DOI: 10.1016/j.fuel.2017.10.065
Año: 2018
Publicado en: FUEL 212 (2018), 605-612
ISSN: 0016-2361

Factor impacto JCR: 5.128 (2018)
Categ. JCR: ENGINEERING, CHEMICAL rank: 13 / 138 = 0.094 (2018) - Q1 - T1
Categ. JCR: ENERGY & FUELS rank: 20 / 103 = 0.194 (2018) - Q1 - T1

Factor impacto SCIMAGO: 1.745 - Chemical Engineering (miscellaneous) (Q1) - Organic Chemistry (Q1) - Fuel Technology (Q1) - Energy Engineering and Power Technology (Q1)

Financiación: info:eu-repo/grantAgreement/ES/MINECO/ENE2013-45454-R
Financiación: info:eu-repo/grantAgreement/ES/MINECO/ENE2014-56857-R
Financiación: info:eu-repo/grantAgreement/ES/MINECO/ENE2016-77982-R
Tipo y forma: Artículo (PostPrint)
Área (Departamento): Área Tecnologi. Medio Ambiente (Dpto. Ing.Quím.Tecnol.Med.Amb.)

Creative Commons Debe reconocer adecuadamente la autoría, proporcionar un enlace a la licencia e indicar si se han realizado cambios. Puede hacerlo de cualquier manera razonable, pero no de una manera que sugiera que tiene el apoyo del licenciador o lo recibe por el uso que hace. No puede utilizar el material para una finalidad comercial. Si remezcla, transforma o crea a partir del material, no puede difundir el material modificado.


Exportado de SIDERAL (2019-11-27-15:47:03)


Visitas y descargas

Este artículo se encuentra en las siguientes colecciones:
Artículos > Artículos por área > Tecnologías del Medio Ambiente



 Registro creado el 2018-11-07, última modificación el 2019-11-27


Postprint:
 PDF
Valore este documento:

Rate this document:
1
2
3
 
(Sin ninguna reseña)