Pyrolysis of cashew nutshells: Characterization of products and energy balance

Ábrego, J. (Universidad de Zaragoza) ; Plaza, D. ; Luño, F. ; Atienza-Martínez, M. (Universidad de Zaragoza) ; Gea, G. (Universidad de Zaragoza)
Pyrolysis of cashew nutshells: Characterization of products and energy balance
Resumen: Cashew cultivation leads to the generation of large amounts of nutshells. In order to determine whether pyrolysis could be a suitable method for the valorization of this agricultural residue, cashew nutshells (CNS) from Burkina Faso were pyrolyzed in the temperature range between 400 and 600 °C in a laboratory-scale fixed bed reactor. The solid, liquid and gaseous fractions were quantified and characterized, with special focus on the solid product. Recovery of the cashew nutshell liquid (CNSL) was accomplished during pyrolysis separately from the pyrolysis liquid. Results suggest that, except for the aqueous fraction, all the products obtained from pyrolysis are suitable for fuel purposes, and that part of the CNSL can be recovered below 200 °C during the heating process. A preliminary energy balance of the process shows that burning the gases can provide the energy necessary for the process at a pyrolysis temperature of 500 °C.
Idioma: Inglés
DOI: 10.1016/j.energy.2018.06.011
Año: 2018
Publicado en: Energy 158 (2018), 72-80
ISSN: 0360-5442

Factor impacto JCR: 5.537 (2018)
Categ. JCR: THERMODYNAMICS rank: 3 / 60 = 0.05 (2018) - Q1 - T1
Categ. JCR: ENERGY & FUELS rank: 15 / 103 = 0.146 (2018) - Q1 - T1

Factor impacto SCIMAGO: 2.048 - Building and Construction (Q1) - Civil and Structural Engineering (Q1) - Electrical and Electronic Engineering (Q1) - Pollution (Q1) - Industrial and Manufacturing Engineering (Q1) - Mechanical Engineering (Q1) - Energy (miscellaneous) (Q1)

Tipo y forma: Artículo (PostPrint)
Área (Departamento): Área Ingeniería Química (Dpto. Ing.Quím.Tecnol.Med.Amb.)
Área (Departamento): Área Tecnologi. Medio Ambiente (Dpto. Ing.Quím.Tecnol.Med.Amb.)


Creative Commons Debe reconocer adecuadamente la autoría, proporcionar un enlace a la licencia e indicar si se han realizado cambios. Puede hacerlo de cualquier manera razonable, pero no de una manera que sugiera que tiene el apoyo del licenciador o lo recibe por el uso que hace. No puede utilizar el material para una finalidad comercial. Si remezcla, transforma o crea a partir del material, no puede difundir el material modificado.


Exportado de SIDERAL (2020-01-17-21:44:59)


Visitas y descargas

Este artículo se encuentra en las siguientes colecciones:
Artículos



 Registro creado el 2019-06-07, última modificación el 2020-01-17


Postprint:
 PDF
Valore este documento:

Rate this document:
1
2
3
 
(Sin ninguna reseña)