Surface activation of calcium zirconate-calcium stabilized zirconia eutectic ceramics with bioactive wollastonite-tricalcium phosphate coatings
Resumen: In this work, we have developed and characterized a ceramic composite based on a core of directionally solidified calcium zirconate-calcium stabilized zirconia (CZO-CSZ) eutectic composite coated with a bioactive glass-ceramic. The aim is to research new orthopedic implants as an alternative to conventional 3Y-TZP bioinert ceramics. The CZO-CSZ eutectic rods were grown from the melt of rods of CaO-ZrO2 in the eutectic composition using the laser floating zone technique (LFZ). The mechanical results indicated that directional eutectics prepared with this technique exhibited good mechanical strength and significant hardness and toughness. The LFZ technique was also used to melt the bioactive coating previously placed by dip coating on the CZO-CSZ rod surface. Depending on the thickness of the coating and the applied laser power, an alloying or coating process was achieved. In the first case, the coating was diluted with the surface of the eutectic cylinder, leading to the segregation of the calcium zirconate and zirconia phases and the formation of a bioactive phase embedding zirconia particles. In the second case, a layer of ceramic glass was formed, well attached to the eutectic cylinder. These layers were both studied from the microstructural and bioactivity points of view.
Idioma: Inglés
DOI: 10.3390/jfb14100510
Año: 2023
Publicado en: Journal of Functional Biomaterials 14, 10 (2023), 510 [12 pp.]
ISSN: 2079-4983

Factor impacto JCR: 5.0 (2023)
Categ. JCR: ENGINEERING, BIOMEDICAL rank: 27 / 123 = 0.22 (2023) - Q1 - T1
Categ. JCR: MATERIALS SCIENCE, BIOMATERIALS rank: 18 / 53 = 0.34 (2023) - Q2 - T2

Factor impacto CITESCORE: 4.6 - Biomedical Engineering (Q2) - Biomaterials (Q3)

Factor impacto SCIMAGO: 0.722 - Biomedical Engineering (Q2) - Biomaterials (Q2)

Financiación: info:eu-repo/grantAgreement/ES/DGA/T02-20R
Tipo y forma: Artículo (Versión definitiva)
Área (Departamento): Área Cienc.Mater. Ingen.Metal. (Dpto. Ciencia Tecnol.Mater.Fl.)

Creative Commons Debe reconocer adecuadamente la autoría, proporcionar un enlace a la licencia e indicar si se han realizado cambios. Puede hacerlo de cualquier manera razonable, pero no de una manera que sugiera que tiene el apoyo del licenciador o lo recibe por el uso que hace.


Exportado de SIDERAL (2024-11-22-12:05:01)


Visitas y descargas

Este artículo se encuentra en las siguientes colecciones:
Artículos



 Registro creado el 2024-01-12, última modificación el 2024-11-25


Versión publicada:
 PDF
Valore este documento:

Rate this document:
1
2
3
 
(Sin ninguna reseña)