130080 20240319081000.0 doi 10.1016/j.measurement.2022.110735 sideral 128148 ART-2022-128148 eng Javier Brosed, F. Universidad de Zaragoza (orcid)0000-0003-3080-9217 Calibration and uncertainty budget analysis of a high precision telescopic instrument for simultaneous laser multilateration 2022 Access copy available to the general public Unrestricted The precision manufacturing industry depends on precision measurement instruments capable of tracing the measurement results to national and international standards. This paper presents a calibration model for a high precision telescopic instrument (HPTI) for machine tool verification together with its estimated uncertainty budget. The instrument tracks autonomously a target using an interferometric sensor to measure distances and allows the simultaneous use of three HPTIs for multilateration, decreasing data capture time and improving measurement accuracy. A calibrating ball beam artefact, previously calibrated with a coordinate measurement machine, is used to trace the calibration results. The uncertainty of the HPTI is estimated in laboratory conditions. The uncertainty budget of the HPTI, as well as the uncertainty of simultaneous multilateration, in workshop conditions are analysed and estimated with Monte Carlo. The calibration model defined gives traceability to the measurement results obtained with the HPTI allowing its use in machine tool verification processes. © 2022 The Author(s) info:eu-repo/grantAgreement/ES/DGA/T56-17R info:eu-repo/grantAgreement/ES/MINECO/DPI2017-90106-R info:eu-repo/semantics/openAccess by http://creativecommons.org/licenses/by/3.0/es/ 5.6 2022 ENGINEERING, MULTIDISCIPLINARY 16 / 90 = 0.178 2022 Q1 T1 INSTRUMENTS & INSTRUMENTATION 9 / 63 = 0.143 2022 Q1 T1 1.106 2022 Applied Mathematics 2022 Q1 Condensed Matter Physics 2022 Q1 Statistics and Probability 2022 Q1 Electrical and Electronic Engineering 2022 Q1 Instrumentation 2022 Q1 Education 2022 Q1 9.0 2022 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion José Aguilar, J. Universidad de Zaragoza (orcid)0000-0002-8609-1358 Acero, R. Universidad de Zaragoza (orcid)0000-0002-4917-8550 Santolaria, J. Universidad de Zaragoza (orcid)0000-0001-7316-0003 Aguado, S. Universidad de Zaragoza (orcid)0000-0001-8689-6482 Pueo, M. Universidad de Zaragoza (orcid)0000-0002-4931-8752 5002 305 Universidad de Zaragoza Dpto. Ingeniería Diseño Fabri. Área Expresión Gráfica en Ing. 5002 515 Universidad de Zaragoza Dpto. Ingeniería Diseño Fabri. Área Ing. Procesos Fabricación 190 (2022), - Measurement MEASUREMENT 0263-2241 5979924 http://zaguan.unizar.es/record/130080/files/texto_completo.pdf Versión publicada 2540600 http://zaguan.unizar.es/record/130080/files/texto_completo.jpg?subformat=icon icon Versión publicada oai:zaguan.unizar.es:130080 articulos driver 2024-03-18-14:03:55 ARTICLE