131589 20240212142201.0 doi 10.1016/j.ijadhadh.2017.02.003 sideral 136915 ART-2017-136915 eng Chiminelli, Agustín Analysis of mixed adhesive joints considering the compaction process 2017 Incorporating a material properties variation along the bondlines has proved to be a useful method for improving adhesive joints performance. In this work, the potential of the technique is analysed for a single lap joint using the mixing adhesives approach. In order to include the compaction process effect in the structural analysis during the joint assembly, a computational fluid-dynamic model capable of integrating different resins along the bondline has been developed. Then, the results obtained from this model are mapped into a finite element model through an application developed for this purpose. Several parametric studies have been carried out comparing different configurations in terms of maximum load capacity of the joints. Finally, one of these joints configurations has been manufactured using a special device developed for assembling these mixed adhesive joints and tested. This banded configuration have shown both numerically and experimentally an ultimate load improvement of over 70%. info:eu-repo/semantics/closedAccess All rights reserved http://www.europeana.eu/rights/rr-f/ 2.065 2017 MATERIALS SCIENCE, MULTIDISCIPLINARY 141 / 283 = 0.498 2017 Q2 T2 ENGINEERING, CHEMICAL 62 / 136 = 0.456 2017 Q2 T2 0.926 2017 Chemical Engineering (miscellaneous) 2017 Q1 Polymers and Plastics 2017 Q1 Biomaterials 2017 Q2 info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion Breto, Rubén Izquierdo, Salvador (orcid)0000-0001-6906-9143 Bergamasco, Luca Duvivier, Emmanuel Lizaranzu, Miguel 76 (2017), 3-10 Int. j. adhes. adhes. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES 0143-7496 2086753 http://zaguan.unizar.es/record/131589/files/texto_completo.pdf Versión publicada 2531339 http://zaguan.unizar.es/record/131589/files/texto_completo.jpg?subformat=icon icon Versión publicada oai:zaguan.unizar.es:131589 articulos driver 2024-02-12-13:57:10 ARTICLE