Investigation on co-firing of coal mine waste residues in pulverized coal combustion systems
Resumen: Millions of tonnes of coal mine waste residues are piled up in dumping sites, causing serious environmental problems. Co-combustion in fluidized bed facilities is the most widespread alternative for the energy utilization of these by-products. However, no experiences have been so far reported of coal mine waste residues co-firing under pulverized fuel combustion technology. This work proves the technical feasibility of co-firing coal with up to 20% coal mine waste residues and investigates the impacts of transferring this co-firing alternative into a commercial unit. Experimental co-firing tests of coal mine waste residues were conducted on a 500 kWth pulverized fuel pilot plant. Regulated emissions (CO, CO2, SO2 and NOx) and visible flame radiation were monitored, obtaining regular and stable flicker and acceptable emissions levels for CO (200 mg/m3N) and NOx (700–800 mg/m3N). Finally, the impact analysis of co-firing coal mine waste residues in a full-scale pulverized fuel plant was performed by simulating the power cycle and combustion process in a 160 MWe pulverized coal combustion unit. Simulation results show the viability of this alternative in terms of plant efficiency, increase in power consumptions of auxiliary equipment and pollutant emissions for co-firing ratios under 10% in energy basis.
Idioma: Inglés
DOI: 10.1016/j.energy.2017.07.174
Año: 2017
Publicado en: Energy 140, Part 1 (2017), 58-68
ISSN: 0360-5442

Factor impacto JCR: 4.968 (2017)
Categ. JCR: THERMODYNAMICS rank: 4 / 59 = 0.068 (2017) - Q1 - T1
Categ. JCR: ENERGY & FUELS rank: 18 / 97 = 0.186 (2017) - Q1 - T1

Factor impacto SCIMAGO: 1.99 - Building and Construction (Q1) - Civil and Structural Engineering (Q1) - Electrical and Electronic Engineering (Q1) - Pollution (Q1) - Industrial and Manufacturing Engineering (Q1) - Mechanical Engineering (Q1) - Energy (miscellaneous) (Q1)

Financiación: info:eu-repo/grantAgreement/ES/MINECO/IPT-2012-0251-120000
Tipo y forma: Artículo (PostPrint)
Área (Departamento): Área Máquinas y Motores Térmi. (Dpto. Ingeniería Mecánica)

Creative Commons Debe reconocer adecuadamente la autoría, proporcionar un enlace a la licencia e indicar si se han realizado cambios. Puede hacerlo de cualquier manera razonable, pero no de una manera que sugiera que tiene el apoyo del licenciador o lo recibe por el uso que hace. No puede utilizar el material para una finalidad comercial. Si remezcla, transforma o crea a partir del material, no puede difundir el material modificado.


Exportado de SIDERAL (2019-07-09-11:36:51)


Visitas y descargas

Este artículo se encuentra en las siguientes colecciones:
Artículos



 Registro creado el 2018-07-19, última modificación el 2019-07-09


Postprint:
 PDF
Valore este documento:

Rate this document:
1
2
3
 
(Sin ninguna reseña)