A comprehensive assessment of alternative absorber-exchanger designs for hybrid PVT-water collectors

Herrando, María (Universidad de Zaragoza) ; Ramos, Alba ; Zabalza, Ignacio (Universidad de Zaragoza) ; Markides, Christos N.

Resumen: In this paper, 26 alternative absorber-exchanger designs for hybrid PV-Thermal (PVT) solar collectors are proposed and compared against a reference-case, commercial sheet-and-tube PVT collector. The collectors involve different geometric design features based on the conventional sheet-and-tube configuration, and also on a newer flat-box structure constructed from alternative polymeric materials with the aim of maintaining or even improving heat transfer and overall (thermal and electrical) performance while achieving reductions in the overall weight and cost of the collectors. The main contributions of this research include: (i) the development and validation of a detailed 3-D computational finite-element model of the proposed PVT collector designs involving multi-physics processes (heat transfer, fluid dynamics and solid mechanics); (ii) results from comparative techno-economic analyses of the proposed PVT designs; and, (iii) further insights from thermal stress and structural deformation analyses of the proposed collectors, which are crucial for ensuring long lifetimes and especially important in the case of polymeric collectors. The results show that, in general, the flat-box designs (characterised by a thin absorber plate) are not sensitive to the flow-channel size or construction material, at least within the range of investigation. A PVT collector featuring a polycarbonate (PC) flat-box design with 3¿×¿2¿mm rectangular channels appears to be a particularly promising alternative to commercial PVT collectors, achieving a slightly improved thermal performance compared to the reference case (with a 4% higher optical efficiency and 15% lower linear heat-loss coefficient), while also lowering the weight (by around 9%) and investment cost (by about 21%) of the collector. The structural analysis shows that the maximum von Mises stress experienced in the absorber-exchanger of the PC flat-box collector is considerably lower than that in the copper sheet-and-tube collector (<13% vs. 64% of the material’s yield stress), which is attributed to the larger thermal expansion of the PC absorber-exchanger, that leads to lower stresses. Therefore, the proposed PC flat-box design is not expected to suffer higher strains than the commercially-available PVT collector.

Idioma: Inglés

DOI: 10.1016/j.apenergy.2018.11.024

Año: 2019

Publicado en: Applied Energy 235 (2019), 1583-1602
ISSN: 0306-2619

Factor impacto JCR: 8.848 (2019)

Categ. JCR: ENGINEERING, CHEMICAL rank: 6 / 143 = 0.042 (2019) - Q1 - T1
Categ. JCR: ENERGY & FUELS rank: 9 / 112 = 0.08 (2019) - Q1 - T1

Factor impacto SCIMAGO: 3.607 - Building and Construction (Q1) - Civil and Structural Engineering (Q1) - Energy (miscellaneous) (Q1) - Nuclear Energy and Engineering (Q1) - Fuel Technology (Q1) - Management, Monitoring, Policy and Law (Q1) - Mechanical Engineering (Q1) - Energy Engineering and Power Technology (Q1)

Financiación: info:eu-repo/grantAgreement/ES/UZ/CAI-Ibercaja-IT9-16

Tipo y forma: Artículo (PostPrint)

Área (Departamento): Área Mecánica de Fluidos (Dpto. Ciencia Tecnol.Mater.Fl.)
Área (Departamento): Área Máquinas y Motores Térmi. (Dpto. Ingeniería Mecánica)