95550 20210902121737.0 doi 10.3390/ma13112548 sideral 119606 ART-2020-119606 eng Elduque, A. Correction: Elduque, A., et al. Electricity consumption estimation of the polymer material injection-molding manufacturing process: Empirical model and application [Materials 2018;11(9):1740] DOI: 10.3390/ma11091740 2020 Access copy available to the general public Unrestricted During the formatting phase of this article [1], the authors did not detect a typographical error in the equations to calculate the SEC value; they would therefore like to make the following correction in both Equations (1) and (7). There was a minus symbol missing in the super index of the ¿ value (percentage of utilization of the injection-molding machine). Equation (1) was wrongly formatted as: SEC (KWh/kg) = (7.5 - 5 × E/100) × (¿)0.5 (1) Moreover, it must be corrected as the following: SEC (KWh/kg) = (7.5 - 5 × E/100) × (¿)-0.5 (1) Equation (7) was wrongly formatted as: SEC = (7.5 - (5 × (E/100) × (((w × 3.6/tc)/(0.0052 × Fc))0.15/(ce × (Ti - Ta)/350.255)0.1))) × (w × 100/(¿ × Vmax))0.5 (7) It must be corrected as the following: SEC = (7.5 - (5 × (E/100) × (((w × 3.6/tc)/(0.0052 × Fc))0.15/(ce × (Ti - Ta)/350.255)0.1))) × (w × 100/(¿ × Vmax))-0.5 (7) The authors would also like to take the opportunity to apologize for any inconvenience that this typographical error may have caused in the calculations done by the readers. All the data, calculations and results are correct, but both equations were missing, in the final version, the minus symbol in the superscript, due to a formatting error. info:eu-repo/semantics/openAccess by http://creativecommons.org/licenses/by/3.0/es/ 3.623 2020 METALLURGY & METALLURGICAL ENGINEERING 17 / 80 = 0.213 2020 Q1 T1 MATERIALS SCIENCE, MULTIDISCIPLINARY 152 / 333 = 0.456 2020 Q2 T2 PHYSICS, CONDENSED MATTER 27 / 69 = 0.391 2020 Q2 T2 PHYSICS, APPLIED 51 / 160 = 0.319 2020 Q2 T1 CHEMISTRY, PHYSICAL 79 / 162 = 0.488 2020 Q2 T2 0.682 2020 Materials Science (miscellaneous) 2020 Q2 Condensed Matter Physics 2020 Q2 info:eu-repo/semantics/other info:eu-repo/semantics/publishedVersion Elduque, D. Universidad de Zaragoza (orcid)0000-0001-9137-3387 Pina, C. Clavería, I. Universidad de Zaragoza (orcid)0000-0003-4230-7900 Javierre, C. Universidad de Zaragoza (orcid)0000-0002-8008-4819 5004 545 Universidad de Zaragoza Dpto. Ingeniería Mecánica Área Ingeniería Mecánica 13, 11 (2020), 2548 [1 pp.] MATERIALS MATERIALS 1996-1944 178586 http://zaguan.unizar.es/record/95550/files/texto_completo.pdf Versión publicada 373042 http://zaguan.unizar.es/record/95550/files/texto_completo.jpg?subformat=icon icon Versión publicada oai:zaguan.unizar.es:95550 articulos driver 2021-09-02-09:40:16 ARTICLE