FEM based mathematical modelling of thrust force during drilling of Al7075-T6
Resumen: Like most machining processes, drilling is affected by many parameters such as the tool diameter, the cutting speed and feed. The current research investigates the possibility of developing a finite element modelling based prediction model for the generated thrust force during drilling of Al7075-T6 with solid carbide tools. A total of 27 drilling experiments were carried out in order to examine the interaction between three key parameters and their effect on thrust force. In addition, simulations of the experiments were realized with the use of DEFORM3D((TM))software in order to obtain the necessary numerical data. Finally, a comparison was made between the experimental and the numerical results to verify that reliable modelling is feasible. The mathematical model was acquired with the use of response surface methodology and the verification of the adequacy of the model was performed through an analysis of variance. The majority of the simulations yielded results in agreement with the experimental results at around 95% and the derived model offered an accuracy of 5.9%.
Idioma: Inglés
DOI: 10.1051/meca/2020046
Año: 2020
Publicado en: Mechanics and Industry 21, 4 (2020), 415 [14 pp.]
ISSN: 2257-7750

Factor impacto JCR: 0.913 (2020)
Categ. JCR: MECHANICS rank: 126 / 135 = 0.933 (2020) - Q4 - T3
Categ. JCR: ENGINEERING, MECHANICAL rank: 120 / 133 = 0.902 (2020) - Q4 - T3

Factor impacto SCIMAGO: 0.256 - Industrial and Manufacturing Engineering (Q3) - Mechanical Engineering (Q3) - Materials Science (miscellaneous) (Q3)

Tipo y forma: Article (Published version)
Área (Departamento): Área Expresión Gráfica en Ing. (Dpto. Ingeniería Diseño Fabri.)
Área (Departamento): Área Ing. Procesos Fabricación (Dpto. Ingeniería Diseño Fabri.)

Exportado de SIDERAL (2022-05-03-12:27:34)


Visitas y descargas

Este artículo se encuentra en las siguientes colecciones:
articulos > articulos-por-area > ingenieria_de_los_procesos_de_fabricacion
articulos > articulos-por-area > expresion_grafica_de_la_ingenieria



 Notice créée le 2022-05-03, modifiée le 2022-05-03


Versión publicada:
 PDF
Évaluer ce document:

Rate this document:
1
2
3
 
(Pas encore évalué)