Energy and environmental benefits of an integrated solar photovoltaic and thermal hybrid, seasonal storage and heat pump system for social housing
Resumen: A facility based on a photovoltaic and thermal hybrid solar field with a seasonal storage tank coupled to a water-to-water heat pump is presented in this paper as an adequate energy supply system for a building of social homes in Zaragoza (Spain), currently under construction. Two types of complementary software have been used for the complete design, sizing, and simulation of the system. DesignBuilder was used to determine the hourly demands from the construction drawings, and TRNSYS was then implemented to dynamically simulate the whole energy system. System performance has been tested in terms of 3E aspects (energy, environmental and economic) with a few well-known key performance indicators. Results obtained by the combined use of the demand simulation software and quantification with different indicators (KPI) show that the proposed solution is suitable for this building: the calculated coverage of the domestic hot water demand is about 80%, the payback period is 8.5 years, and the installation could avoid 44, 200 kgCO2/year of global warming potential. To sum up, this paper shows how this novel, high-efficiency heating system is a good solution for social housing, owing to its low energy costs and a possible subsidization of a fraction of the high initial investment. © 2022 The Authors
Idioma: Inglés
DOI: 10.1016/j.applthermaleng.2022.118662
Año: 2022
Publicado en: Applied Thermal Engineering 213 (2022), 118662 [13 pp]
ISSN: 1359-4311

Factor impacto JCR: 6.4 (2022)
Categ. JCR: ENGINEERING, MECHANICAL rank: 9 / 136 = 0.066 (2022) - Q1 - T1
Categ. JCR: THERMODYNAMICS rank: 7 / 63 = 0.111 (2022) - Q1 - T1
Categ. JCR: MECHANICS rank: 9 / 137 = 0.066 (2022) - Q1 - T1
Categ. JCR: ENERGY & FUELS rank: 40 / 119 = 0.336 (2022) - Q2 - T2

Factor impacto CITESCORE: 11.8 - Engineering (Q1) - Chemical Engineering (Q1) - Energy (Q1)

Factor impacto SCIMAGO: 1.559 - Energy Engineering and Power Technology (Q1) - Mechanical Engineering (Q1) - Industrial and Manufacturing Engineering (Q1) - Fluid Flow and Transfer Processes (Q1)

Tipo y forma: Article (Published version)
Área (Departamento): Área Ingeniería Eléctrica (Dpto. Ingeniería Eléctrica)
Área (Departamento): Área Máquinas y Motores Térmi. (Dpto. Ingeniería Mecánica)

Exportado de SIDERAL (2024-03-18-16:11:17)


Visitas y descargas

Este artículo se encuentra en las siguientes colecciones:
articulos > articulos-por-area > maquinas_y_motores_termicos
articulos > articulos-por-area > ingenieria_electrica



 Notice créée le 2022-11-24, modifiée le 2024-03-19


Versión publicada:
 PDF
Évaluer ce document:

Rate this document:
1
2
3
 
(Pas encore évalué)