Estudios
I+D+I
Institución
Internacional
Vida Universitaria
Repositorio Institucional de Documentos
Buscar
Enviar
Personalizar
Sus alertas
Sus carpetas
Sus búsquedas
Ayuda
EN
/
ES
Página principal
>
Artículos
> Simulation to recover niobium and tantalum from the tin slags of the old penouta mine: A case study
Estadísticas de uso
Gráficos
Simulation to recover niobium and tantalum from the tin slags of the old penouta mine: A case study
Magdalena R.
;
Valero A.
(Universidad de Zaragoza)
;
Calvo G.
(Universidad de Zaragoza)
;
Alguacil F.J.
;
López F.A.
Resumen:
Demand for niobium and tantalum is increasing exponentially as these are essential ingre-dients for the manufacture of, among others, capacitors in technological devices and ferroniobium. Mine tailings rich in such elements could constitute an important source of Nb and Ta in the future and alleviate potential supply risks. This paper evaluates the possibility of recovering niobium and tantalum from the slags generated during the tin beneficiation process of mine tailings from the old Penouta mine, located in Spain. To do so, a simulation of the processes required to bene-ficiate and refine both elements is carried out. After carbothermic tin reduction, the slags are sent to a hydrometallurgical process where niobium oxide and tantalum oxide are obtained at the end. Reagents, water, and energy consumption, in addition to emissions, effluents, and product yields, are assessed. Certain factors were identified as critical, and recirculation was encouraged in the model to maximise production and minimise reagents’ use and wastes. With this simulation, considering 3000 production hours per year, the metal output from the tailings of the old mine could cover around 1% and 7.4% of the world annual Nb and Ta demand, respectively. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.
Idioma:
Inglés
DOI:
10.3390/min11101123
Año:
2021
Publicado en:
Minerals
11, 10 (2021), 1123 [12 pp]
ISSN:
2075-163X
Factor impacto JCR:
2.818 (2021)
Categ. JCR:
GEOCHEMISTRY & GEOPHYSICS
rank: 42 / 87 = 0.483
(2021)
- Q2
- T2
Categ. JCR:
MINING & MINERAL PROCESSING
rank: 8 / 20 = 0.4
(2021)
- Q2
- T2
Categ. JCR:
MINERALOGY
rank: 11 / 30 = 0.367
(2021)
- Q2
- T2
Factor impacto CITESCORE:
3.7 -
Earth and Planetary Sciences
(Q2)
Factor impacto SCIMAGO:
0.522 -
Geotechnical Engineering and Engineering Geology
(Q2) -
Geology
(Q2)
Financiación:
info:eu-repo/grantAgreement/ES/MICINN/PID2020-116851RB-I00
Financiación:
info:eu-repo/grantAgreement/ES/MICINN/RTC-2017-6629-5
Tipo y forma:
Artículo (Versión definitiva)
Área (Departamento):
Área Didáctica Ciencias Exper.
(
Dpto. Didácticas Específicas
)
Área (Departamento):
Área Máquinas y Motores Térmi.
(
Dpto. Ingeniería Mecánica
)
Debe reconocer adecuadamente la autoría, proporcionar un enlace a la licencia e indicar si se han realizado cambios. Puede hacerlo de cualquier manera razonable, pero no de una manera que sugiera que tiene el apoyo del licenciador o lo recibe por el uso que hace.
Exportado de SIDERAL (2023-10-06-12:36:05)
Enlace permanente:
Copiar
Visitas y descargas
Este artículo se encuentra en las siguientes colecciones:
Artículos
Volver a la búsqueda
Registro creado el 2023-10-06, última modificación el 2023-10-06
Versión publicada:
PDF
Valore este documento:
Rate this document:
1
2
3
4
5
(Sin ninguna reseña)
Añadir a una carpeta personal
Exportar como
BibTeX
,
MARC
,
MARCXML
,
DC
,
EndNote
,
NLM
,
RefWorks