Production of Antioxidant Additives and High-quality Activated Biochar from Pyrolysis of Argan Shells

Afailal, Zainab ; Gil-Lalaguna, Noemí (Universidad de Zaragoza) ; Macías, Robert J. ; Gonzalo, Alberto (Universidad de Zaragoza) ; Sánchez, José Luis (Universidad de Zaragoza)

Resumen: An integral valorization route based on a pyrolysis process has been proposed to find sustainable applications for argan shells focused on the simultaneous production of activated biochar and antioxidant additives from bio-oil. The bio-oil obtained in the pyrolysis process was furtherly upgraded (hydrothermal treatment and extraction process) to obtain antioxidant additives. On the other hand, the biochar obtained in the pyrolysis was used as a feedstock to produce high-quality activated biochar (by physical activation with CO2). The increase in the pyrolysis temperature (350–550 °C) hardly affected the pyrolysis products distribution (biochar yields of 28–34 wt.% and bio-oil yields between 51 and 55 wt.%), but it led to a slight decrease in the content of phenolic monomers extracted from bio-oil (from 63 wt.% at 350 °C to 53 wt.% at 550 °C). When these extracted fractions were blended with biodiesel (<1 wt.%), improvements of up to 300% in biodiesel oxidation stability were attained. The hydrothermal treatment of the bio-oil did not show noteworthy effects either on the production or antioxidant performance of the extracted fractions if compared with the fractions extracted from the raw bio-oil. Regarding the valorization of argan shells biochar, the activated biochar prepared from it showed considerable potential as an adsorbent material for CO2 (125 mg of CO2 per g of the activated biochar) or phenols (complete removal of 99.6% in 4 h of contact time). It was characterized by a high BET surface area (up to 1500 m2/g), a high carbon content (up to 95 wt.%), low ash content (around 2 wt.%), and a pH of around 8.

Idioma: Inglés

DOI: 10.1007/s12155-023-10652-0

Año: 2023

Publicado en: BIOENERGY RESEARCH 17 (2023), 453–466
ISSN: 1939-1234

Factor impacto JCR: 3.1 (2023)

Categ. JCR: ENVIRONMENTAL SCIENCES rank: 167 / 358 = 0.466 (2023) - Q2 - T2
Categ. JCR: ENERGY & FUELS rank: 105 / 171 = 0.614 (2023) - Q3 - T2

Factor impacto CITESCORE: 6.7 - Agronomy and Crop Science (Q1) - Energy (miscellaneous) (Q2) - Renewable Energy, Sustainability and the Environment (Q2)

Factor impacto SCIMAGO: 0.647 - Agronomy and Crop Science (Q1) - Renewable Energy, Sustainability and the Environment (Q2) - Energy (miscellaneous) (Q2)

Financiación: info:eu-repo/grantAgreement/ES/AEI/PID2020-114936RB-I00
Financiación: info:eu-repo/grantAgreement/ES/DGA-FEDER/T22-20R

Tipo y forma: Article (Published version)

Área (Departamento): Área Ingeniería Química (Dpto. Ing.Quím.Tecnol.Med.Amb.)
Área (Departamento): Área Tecnologi. Medio Ambiente (Dpto. Ing.Quím.Tecnol.Med.Amb.)