Design and optimization of small inductors on extra-thin PCB for flexible cooking surfaces

Serrano, Javier ; Lope, Ignacio (Universidad de Zaragoza) ; Acero, Jesús (Universidad de Zaragoza) ; Carretero, Claudio (Universidad de Zaragoza) ; Burdío, José Miguel (Universidad de Zaragoza) ; Alonso, Rafael (Universidad de Zaragoza)

Resumen: The following paper describes the design and optimization method for a small inductor in printed circuit board, which is later used in the implementation of a flexible cooking surface prototype. The method combines analytical developments with finite element analysis (FEA) simulations, providing an important decrease of the computational costs. This is followed by the corresponding calculations in order to minimize conduction and proximity losses in the winding by optimizing the copper volume in the winding and the conductor cross-section dimensions. A parametric analysis is carried out to define the induction system that leads to the optimal efficiency, which, moreover, proves extra-thin PCBs as the most suitable solution. A laboratory prototype of a flexible cooking surface was implemented and tested under real working conditions. The empirical characterization produced good results, which are consistent with the simulations. Additionally, the correct thermal behavior of the arrangement and its adaptability to different pot sizes was verified.

Idioma: Inglés

DOI: 10.1109/TIA.2016.2602217

Año: 2017

Publicado en: IEEE Transactions on Industry Applications 53, 1 (2017), 371-379
ISSN: 0093-9994

Factor impacto JCR: 2.743 (2017)

Categ. JCR: ENGINEERING, MULTIDISCIPLINARY rank: 14 / 86 = 0.163 (2017) - Q1 - T1
Categ. JCR: ENGINEERING, ELECTRICAL & ELECTRONIC rank: 80 / 260 = 0.308 (2017) - Q2 - T1

Factor impacto SCIMAGO: 1.02 - Control and Systems Engineering (Q1) - Industrial and Manufacturing Engineering (Q1) - Electrical and Electronic Engineering (Q1)

Financiación: info:eu-repo/grantAgreement/ES/MEC/FPU-AP2010-4446
Financiación: info:eu-repo/grantAgreement/ES/MINECO/CSD2009-00046
Financiación: info:eu-repo/grantAgreement/ES/MINECO/RTC-2014-1847-6
Financiación: info:eu-repo/grantAgreement/ES/MINECO/TEC2013-42937-R

Tipo y forma: Artículo (PostPrint)

Área (Departamento): Área Física Aplicada (Dpto. Física Aplicada)
Área (Departamento): Área Ingen.Sistemas y Automát. (Dpto. Informát.Ingenie.Sistms.)
Área (Departamento): Área Tecnología Electrónica (Dpto. Ingeniería Electrón.Com.)