Enhancing waste hemp hurd-derived anodes for sodium-ion batteries through hydrochloric acid-mediated hydrothermal pretreatment

Antorán, Daniel (Universidad de Zaragoza) ; Alvira, Darío (Universidad de Zaragoza) ; Sebastián, Víctor (Universidad de Zaragoza) ; Manyà, Joan J. (Universidad de Zaragoza)

Resumen: Waste hemp hurd (WHH) was used as a sustainable feedstock for producing hard carbon-based anodes for sodium-ion batteries (SIBs). Two easily scalable production pathways were tested and compared: (1) pyrolysis (at 500 °C) and subsequent annealing at 800, 1000 or 1200 °C, and (2) hydrothermal pretreatment (at 180 °C) and subsequent annealing at the above-mentioned highest temperatures. Results indicated that when a HCl (2 mol m−3) aqueous solution was used as hydrothermal medium, the textural, structural and surface chemistry features linked to the electrochemical performance of the resulting hard carbons improved. The WHH-derived electrode produced via HCl-mediated hydrothermal pretreatment and subsequent annealing at 1000 °C showed an exceptional electrochemical performance in terms of specific capacity (535 mA h g−1 at 30 mA g−1) and rate capability (372, 156, 115, and 83 mA h g−1 at 0.1, 0.5, 1, and 2 A g−1, respectively) when an ester-based electrolyte was used (NaTFSI in EC/DMC). Using an ether-based electrolyte (NaPF6 in diglyme) improved both the ICE (from 69% to 78%) and cycling stability (85% of capacity retention after 300 cycles at 1 A g−1; 91% when current rate returned to 0.1 A g−1). In summary, relatively low-cost WHH-derived carbons are able to deliver an exceptional performance, much better than that reported so far for other biomass-derived carbons, and even close to that exhibited by more expensive and complex composite and hybrid materials.

Idioma: Inglés

DOI: 10.1016/j.biombioe.2024.107197

Año: 2024

Publicado en: BIOMASS & BIOENERGY 184 (2024), 107197 [13 pp.]
ISSN: 0961-9534

Factor impacto JCR: 5.8 (2024)

Categ. JCR: BIOTECHNOLOGY & APPLIED MICROBIOLOGY rank: 21 / 177 = 0.119 (2024) - Q1 - T1
Categ. JCR: AGRICULTURAL ENGINEERING rank: 3 / 20 = 0.15 (2024) - Q1 - T1
Categ. JCR: ENERGY & FUELS rank: 65 / 182 = 0.357 (2024) - Q2 - T2

Factor impacto SCIMAGO: 1.16 - Agronomy and Crop Science (Q1) - Waste Management and Disposal (Q1) - Forestry (Q1) - Renewable Energy, Sustainability and the Environment (Q2)

Financiación: info:eu-repo/grantAgreement/ES/DGA-FEDER/T22-23R
Financiación: info:eu-repo/grantAgreement/ES/MICINN/PID2029-107737RB-I00

Tipo y forma: Article (Published version)

Área (Departamento): Área Ingeniería Química (Dpto. Ing.Quím.Tecnol.Med.Amb.)
Área (Departamento): Proy. investigación HKA (Dpto. Ing.Quím.Tecnol.Med.Amb.)