Optimal design of an LCC-S WPT3 Z1 SAE J2954 compliant system, using NSGA-II with nested genetic algorithms for simultaneous local optimization

García-Izquierdo, O. (Universidad de Zaragoza) ; Sanz, J.F. (Universidad de Zaragoza) ; Villa, J.L. (Universidad de Zaragoza) ; Martin-Segura, G.

Resumen: Wireless Power Transfer (WPT) for electric vehicles is one of the most promising methods that, given its advantages, will drive the deployment of electric vehicles. This paper presents a mathematical optimization method applied to the complete design of an LCC-S WPT3 Z1 11 kW system that complies with the SAE J2954 standard (Wireless Power Transfer for Light-Duty Plug-in/Electric Vehicles and Alignment Methodology, 2020). A design method based on three phases is proposed, allowing the complete inductor system, including ferrites shielding and compensation circuit components, to function in any relative primary and secondary position. In Phase 1, a multi-objective NSGA-II algorithm is designed, utilizing three nested genetic algorithms. The goal is simultaneously searching for the local optimum between the primary and secondary systems in three positions. This is achieved by modeling the circuit’s electrical and electromagnetic parameters with equations, enabling an iterative process with reduced computational time. The NSGA-II algorithm yields three scenarios: primary copper volume minimization, secondary copper volume minimization, and a compromise solution that optimizes the total volume. The result is then modeled in Phase 2 using a 3D finite element program that includes ferrite and optimal shielding, obtaining the values of inductances and mutual inductance in the three positions, as well as design data for manufacturing. This result is introduced in Phase 3 to optimize compensation circuit components using a second NSGA-II algorithm with three nested genetic algorithms. Again, three scenarios are obtained based on the desired system behavior and the optimal cost of the components. The result is validated through simulation with Matlab-Simulink and experimentally using a prototype constructed for this purpose.

Idioma: Inglés

DOI: 10.1016/j.apenergy.2024.123369

Año: 2024

Publicado en: Applied Energy 367 (2024), 123369 [20 pp.]
ISSN: 0306-2619

Factor impacto JCR: 11.0 (2024)

Categ. JCR: ENGINEERING, CHEMICAL rank: 12 / 175 = 0.069 (2024) - Q1 - T1
Categ. JCR: ENERGY & FUELS rank: 20 / 182 = 0.11 (2024) - Q1 - T1

Factor impacto SCIMAGO: 2.902 - Energy (miscellaneous) (Q1) - Building and Construction (Q1) - Renewable Energy, Sustainability and the Environment (Q1) - Mechanical Engineering (Q1) - Management, Monitoring, Policy and Law (Q1)

Financiación: info:eu-repo/grantAgreement/ES/MICINN/PID2022-141796OB-I00

Tipo y forma: Article (Published version)

Área (Departamento): Área Ingeniería Eléctrica (Dpto. Ingeniería Eléctrica)