A retinal simulation study on the influence of spherical aberration, astigmatism and optotype on the Jackson cross cylinder test
Gargallo, Diana (Universidad de Zaragoza) ; García, Esther ; Perches, Sara (Universidad de Zaragoza) ; Remón, Laura (Universidad de Zaragoza) ; Ares, Jorge (Universidad de Zaragoza)
Resumen: Purpose
To study how spherical High-Order Aberration (HOA), astigmatism levels (-0.75 D and -1.25 D), and optotype type (dot pattern vs. letter row) influence patients’ responses in identifying the cylinder axis orientation with the Jackson Cross Cylinder Technique (JCCT).
Methods
Numerical simulations of retinal images corresponding to JCCT procedures were conducted and evaluated by 40 subjects. In order to do this, synthetic aberrometric profiles with and without HOAs (4th-order and 6th-order spherical aberrations) and two different astigmatism levels were generated from different Jackson Cross Cylinder axis positions and flips. The variable under study was the percentage of correct responses (hits) during each flip of the cross-cylinder lens. Statistical significance was assessed through confidence intervals overlapping evaluation.
Results
To achieve 90 % accuracy, the JCCT should begin by deviating >7.5° from the subject's astigmatism axis without spherical HOA and by >15° with them. The magnitude of astigmatism had minor relevance. The dot pattern was more accurate than the letters without HOAs; however, 72.5 % of observers considered that letter optotypes simplify the blur discrimination task.
Conclusions
According to our simulation experiment for astigmatic axis selection with JCCT, the presence of spherical HOAs significantly impacts the accuracy of patient responses. The type of optotype and the magnitude of astigmatism did not exhibit a clear relationship with accuracy, except in the case of the dot pattern optotype in the absence of HOAs. Under these conditions, the dot pattern achieved the highest rate of accurate responses.
Idioma: Inglés
DOI: 10.1016/j.optom.2025.100543
Año: 2025
Publicado en: Journal of Optometry 18, 2 (2025), 100543
ISSN: 1888-4296
Financiación: info:eu-repo/grantAgreement/ES/DGA-FEDER/E44-23R
Financiación: info:eu-repo/grantAgreement/ES/MICIU/PID2020-114311RA-I00
Tipo y forma: Artículo (Versión definitiva)
Área (Departamento): Área Óptica (Dpto. Física Aplicada)
Debe reconocer adecuadamente la autoría, proporcionar un enlace a la licencia e indicar si se han realizado cambios. Puede hacerlo de cualquier manera razonable, pero no de una manera que sugiera que tiene el apoyo del licenciador o lo recibe por el uso que hace. No puede utilizar el material para una finalidad comercial. Si remezcla, transforma o crea a partir del material, no puede difundir el material modificado.
Exportado de SIDERAL (2025-03-26-13:55:23)
Visitas y descargas
To study how spherical High-Order Aberration (HOA), astigmatism levels (-0.75 D and -1.25 D), and optotype type (dot pattern vs. letter row) influence patients’ responses in identifying the cylinder axis orientation with the Jackson Cross Cylinder Technique (JCCT).
Methods
Numerical simulations of retinal images corresponding to JCCT procedures were conducted and evaluated by 40 subjects. In order to do this, synthetic aberrometric profiles with and without HOAs (4th-order and 6th-order spherical aberrations) and two different astigmatism levels were generated from different Jackson Cross Cylinder axis positions and flips. The variable under study was the percentage of correct responses (hits) during each flip of the cross-cylinder lens. Statistical significance was assessed through confidence intervals overlapping evaluation.
Results
To achieve 90 % accuracy, the JCCT should begin by deviating >7.5° from the subject's astigmatism axis without spherical HOA and by >15° with them. The magnitude of astigmatism had minor relevance. The dot pattern was more accurate than the letters without HOAs; however, 72.5 % of observers considered that letter optotypes simplify the blur discrimination task.
Conclusions
According to our simulation experiment for astigmatic axis selection with JCCT, the presence of spherical HOAs significantly impacts the accuracy of patient responses. The type of optotype and the magnitude of astigmatism did not exhibit a clear relationship with accuracy, except in the case of the dot pattern optotype in the absence of HOAs. Under these conditions, the dot pattern achieved the highest rate of accurate responses.
Idioma: Inglés
DOI: 10.1016/j.optom.2025.100543
Año: 2025
Publicado en: Journal of Optometry 18, 2 (2025), 100543
ISSN: 1888-4296
Financiación: info:eu-repo/grantAgreement/ES/DGA-FEDER/E44-23R
Financiación: info:eu-repo/grantAgreement/ES/MICIU/PID2020-114311RA-I00
Tipo y forma: Artículo (Versión definitiva)
Área (Departamento): Área Óptica (Dpto. Física Aplicada)
Debe reconocer adecuadamente la autoría, proporcionar un enlace a la licencia e indicar si se han realizado cambios. Puede hacerlo de cualquier manera razonable, pero no de una manera que sugiera que tiene el apoyo del licenciador o lo recibe por el uso que hace. No puede utilizar el material para una finalidad comercial. Si remezcla, transforma o crea a partir del material, no puede difundir el material modificado.Exportado de SIDERAL (2025-03-26-13:55:23)
Enlace permanente:
Visitas y descargas
Este artículo se encuentra en las siguientes colecciones:
Artículos > Artículos por área > Optica
Registro creado el 2025-03-26, última modificación el 2025-03-26