In-situ measurements of temperature distribution during transmission laser welding of poly(aryletherketone)
Resumen: In this work, the temperature distribution inside the specimens has been measured during transmission laser welding. The material studied is a high performance thermoplastic of the polyaryletherketone (PAEK) family. The assembly consists of a quasi-amorphous sample as the upper part and a semi-crystalline sample as the lower part. The temperature fields were measured by infrared thermography with the camera sensor perpendicular to the welded interface. With an energy beam of 28 J.mm-2 and irradiation time of 15s, we have noticed that the maximum temperature inside the sample is kept far from the PAEK degradation one. Moreover, the temperature at the interface reaches the melting temperature thus assuring enough mobility for polymeric chains to get adhesion at the interface. Finally, the location and size of the heat-affected zone (HAZ) has been determined.
Idioma: Inglés
DOI: 10.1063/1.4963408
Año: 2016
Publicado en: AIP conference proceedings 1769 (2016), [6 pp]
ISSN: 0094-243X

Originalmente disponible en: Texto completo de la revista

Factor impacto SCIMAGO:

Tipo y forma: Article (Published version)
Área (Departamento): Ciencia de los Materiales e Ingeniería Metalúrgica (Departamento de Ciencia y Tecnología de Materiales y Fluidos)
Exportado de SIDERAL (2017-05-04-09:15:17)

Este artículo se encuentra en las siguientes colecciones:
articulos > articulos-por-area > ciencia_de_los_materiales_e_ingenieria_metalurgica



 Notice créée le 2016-12-12, modifiée le 2017-05-04


Versión publicada:
 PDF
Évaluer ce document:

Rate this document:
1
2
3
 
(Pas encore évalué)