Microtubular solid oxide fuel cells fabricated by gel-casting: the role of supporting microstructure on the mechanical properties
Morales, M. ; Laguna-Bercero, M.A. (Universidad de Zaragoza)
Resumen: Different cell configurations of anode-supported microtubular solid oxide fuel cells (mT-SOFCs) using samaria-doped ceria (SDC) as the electrolyte were fabricated. Several cells were processed varying the porosity and wall thickness (outer diameter) of NiO-SDC tubular supports. Suitable aqueous slurry formulations of NiO-SDC for gel-casting were prepared using agarose, as a gelling agent, and sucrose, as a pore former. The subsequent NiO-SDC anode functional layer (AFL), the SDC electrolyte and the La0.6Sr0.4Co0.2Fe0.8O3-d-SDC cathode were deposited by spray-coating. Afterwards, the electrochemical performance of different single cells was tested under humidified hydrogen as the fuel and air as the oxidant. The mechanical strength of the supporting tubes at different processing stages (green, pre-/post-sintering, post-reduction, post-redox cycle conditions) were also determined to study the macro-mechanical failure behaviour of the cells. In addition, the mechanical strength of half-cells with different porosity, sintering temperature and wall thickness in the tubular supports was also determined. For this purpose, the modulus of rupture was measured by a three point bending test. This study shows that the electrochemical properties and mechanical strength are feasible for further development of anode-supported mT-SOFCs fabricated by gel-casting.
Idioma: Inglés
DOI: 10.1039/c7ra01259d
Año: 2017
Publicado en: RSC Advances 7, 29 (2017), 17620-17628
ISSN: 2046-2069
Factor impacto JCR: 2.936 (2017)
Categ. JCR: CHEMISTRY, MULTIDISCIPLINARY rank: 71 / 171 = 0.415 (2017) - Q2 - T2
Factor impacto SCIMAGO: 0.863 - Chemistry (miscellaneous) (Q1) - Chemical Engineering (miscellaneous) (Q1)
Financiación: info:eu-repo/grantAgreement/ES/MINECO/MAT2015-68078-R
Tipo y forma: Article (Published version)
Área (Departamento): Área Cienc.Mater. Ingen.Metal. (Dpto. Ciencia Tecnol.Mater.Fl.)
You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. You may not use the material for commercial purposes.
Exportado de SIDERAL (2019-07-09-12:01:18)
Visitas y descargas
Idioma: Inglés
DOI: 10.1039/c7ra01259d
Año: 2017
Publicado en: RSC Advances 7, 29 (2017), 17620-17628
ISSN: 2046-2069
Factor impacto JCR: 2.936 (2017)
Categ. JCR: CHEMISTRY, MULTIDISCIPLINARY rank: 71 / 171 = 0.415 (2017) - Q2 - T2
Factor impacto SCIMAGO: 0.863 - Chemistry (miscellaneous) (Q1) - Chemical Engineering (miscellaneous) (Q1)
Financiación: info:eu-repo/grantAgreement/ES/MINECO/MAT2015-68078-R
Tipo y forma: Article (Published version)
Área (Departamento): Área Cienc.Mater. Ingen.Metal. (Dpto. Ciencia Tecnol.Mater.Fl.)
You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. You may not use the material for commercial purposes. Exportado de SIDERAL (2019-07-09-12:01:18)
Permalink:
Visitas y descargas
Este artículo se encuentra en las siguientes colecciones:
Articles > Artículos por área > Ciencia de los Materiales e Ingeniería Metalúrgica
Record created 2017-05-02, last modified 2019-07-09