Microstructural and wear behavior characterization of porous layers produced by pulsed laser irradiation in glass-ceramics substrates
Resumen: In this work, wear behavior and microstructural characterization of porous layers produced in glass-ceramic substrates by pulsed laser irradiation in the nanosecond range are studied under unidirectional sliding conditions against AISI316 and corundum counterbodies. Depending on the optical configuration of the laser beam and on the working parameters, the local temperature and pressure applied over the interaction zone can generate a porous glass-ceramic layer. Material transference from the ball to the porous glass-ceramic layer was observed in the wear tests carried out against the AISI316 ball counterface whereas, in the case of the corundum ball, the wear volume loss was concentrated in the porous layer. Wear rate and friction coefficient presented higher values than expected for dense glass-ceramics.
Idioma: Inglés
DOI: 10.3390/ma6093963
Año: 2013
Publicado en: MATERIALS 6, 9 (2013), 3963-3977
ISSN: 1996-1944

Factor impacto JCR: 1.879 (2013)
Categ. JCR: MATERIALS SCIENCE, MULTIDISCIPLINARY rank: 80 / 246 = 0.325 (2013) - Q2 - T1
Factor impacto SCIMAGO:

Financiación: info:eu-repo/grantAgreement/ES/MINECO/Consolider-Funcoat/CSD2008-0023
Tipo y forma: Article (Published version)
Área (Departamento): Ciencia de los Materiales e Ingeniería Metalúrgica (Departamento de Ciencia y Tecnología de Materiales y Fluidos)
Exportado de SIDERAL (2017-06-12-09:14:07)

Este artículo se encuentra en las siguientes colecciones:
articulos > articulos-por-area > ciencia_de_los_materiales_e_ingenieria_metalurgica



 Notice créée le 2017-06-12, modifiée le 2017-06-12


Versión publicada:
 PDF
Évaluer ce document:

Rate this document:
1
2
3
 
(Pas encore évalué)