A methodology for the derivation of unloaded abdominal aortic aneurysm geometry with experimental validation

Chandra, Santanu ; Gnanaruban, Vimalatharmaiyah ; Riveros, Fabian ; Rodriguez, José F. (Universidad de Zaragoza) ; Finol, Ender A.

Resumen: In this work, we present a novel method for the derivation of the unloaded geometry of an abdominal aortic aneurysm (AAA) from a pressurized geometry in turn obtained by 3D reconstruction of computed tomography (CT) images. The approach was experimentally validated with an aneurysm phantom loaded with gauge pressures of 80, 120, and 140mm Hg. The unloaded phantom geometries estimated from these pressurized states were compared to the actual unloaded phantom geometry, resulting in mean nodal surface distances of up to 3.9% of the maximum aneurysm diameter. An in-silico verification was also performed using a patient-specific AAA mesh, resulting in maximum nodal surface distances of 8 lm after running the algorithm for eight iterations. The methodology was then applied to 12 patient-specific AAA for which their corresponding unloaded geometries were generated in 5-8 iterations. The wall mechanics resulting from finite element analysis of the pressurized (CT image-based) and unloaded geometries were compared to quantify the relative importance of using an unloaded geometry for AAA biomechanics. The pressurized AAA models underestimate peak wall stress (quantified by the first principal stress component) on average by 15% compared to the unloaded AAA models. The validation and application of the method, readily compatible with any finite element solver, underscores the importance of generating the unloaded AAA volume mesh prior to using wall stress as a biomechanical marker for rupture risk assessment.

Idioma: Inglés

DOI: 10.1115/1.4034425

Año: 2016

Publicado en: JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME 138, 10 (2016), 101005 [11 pp.]
ISSN: 0148-0731

Factor impacto JCR: 2.057 (2016)

Categ. JCR: ENGINEERING, BIOMEDICAL rank: 38 / 77 = 0.494 (2016) - Q2 - T2
Categ. JCR: BIOPHYSICS rank: 50 / 73 = 0.685 (2016) - Q3 - T3

Factor impacto SCIMAGO: 0.966 - Biomedical Engineering (Q1) - Physiology (medical) (Q2)

Tipo y forma: Article (Published version)

Área (Departamento): Área Mec.Med.Cont. y Teor.Est. (Dpto. Ingeniería Mecánica)