Amine-impregnated Alumina Solid Sorbents for CO2 Capture. Lessons Learned

Lara, Y. ; Romeo, L.M. (Universidad de Zaragoza)

Resumen: The application of Amine-impregnated Alumina Solid Sorbent Carbon Capture is a suitable option to increase CO2 capture efficiency and to reduce by several percentage points the efficiency penalty of CCS in power plants. These sorbents require less regeneration energy due to the reduction in water content and the higher heat capacity of solids. The objective is to demonstrate that the use of amine-impregnated alumina solid sorbents is a suitable option to increase CO2 capture efficiency and to reduce several percentage points the efficiency penalty caused by the capture system in the power plant. The proposed innovative sorbent consists in amines supported on high surface area and high porosity solid materials, such as alumina and silica-alumina. Good results have been achieved. Important high porosity support makes possible to obtain high CO2 capture capacities over 50 mg CO2/g of sorbent. As a consequence, the combination of this CCS option with a coal power plant may reduce the efficiency penalty down to 7 efficiency points. This figure could make feasible the impregnated amine solid sorbent as a future and promising option for CO2 capture.

Idioma: Inglés

DOI: 10.1016/j.egypro.2017.03.1383

Año: 2017

Publicado en: Energy procedia 114 (2017), 2372-2379
ISSN: 1876-6102

Financiación: info:eu-repo/grantAgreement/ES/MINECO/ENE2013-45353-R
Financiación: info:eu-repo/grantAgreement/EUR/RFCS/RFCP-CT-2013-00009

Tipo y forma: Article (Published version)

Área (Departamento): Área Máquinas y Motores Térmi. (Dpto. Ingeniería Mecánica)