Decision-making methodology for managing photovoltaic surplus electricity through Power to Gas: Combined heat and power in urban buildings
Resumen: Power to Gas technology, which converts surplus electricity into synthetic methane, is a promising alternative to overcome the ¿uctuating behavior of renewable energies. Hybridization with oxy-fuel combustion provides the CO2 ¿ow required in the methanation process and allows supplying both heat and electricity, keeping the CO 2 in a closed loop. The complexity of these facilities makes their management a key factor to be economically viable. This work presents a decision-making methodology to size and manage a cogeneration system that combines solar photovoltaic, chemical storage through Power to Gas, and an oxy-fuel boiler. Up to 35 potential situations have been identi¿ed, depending on the surplus electricity, occupancy of the intermediate storages of hydrogen and synthetic methane, and thermal demand. For illustration purposes, the methodology has been applied to a case study in the building sector. Speci¿cally, a building with 270 kW of solar photovoltaic installed power is analyzed under nine energy scenarios. The calculated capacities of electrolysis vary from 65 kW to 96 kW with operating hours between 2184 and 2475 h. The percentage of methane stored in the gas grid varies from 0.0% (no injection) to 30.9%. The more favorable scenarios are those with the lowest demands, showing temporary displacements beyond the month between injection and utilization.
Idioma: Inglés
DOI: 10.1016/j.apenergy.2018.06.128
Año: 2018
Publicado en: Applied Energy 228 (2018), 1032-1045
ISSN: 0306-2619

Factor impacto JCR: 8.426 (2018)
Categ. JCR: ENGINEERING, CHEMICAL rank: 5 / 138 = 0.036 (2018) - Q1 - T1
Categ. JCR: ENERGY & FUELS rank: 8 / 103 = 0.078 (2018) - Q1 - T1

Factor impacto SCIMAGO: 3.455 - Building and Construction (Q1) - Civil and Structural Engineering (Q1) - Energy (miscellaneous) (Q1) - Nuclear Energy and Engineering (Q1) - Fuel Technology (Q1) - Management, Monitoring, Policy and Law (Q1) - Mechanical Engineering (Q1) - Energy Engineering and Power Technology (Q1)

Financiación: info:eu-repo/grantAgreement/ES/MINECO-FEDER/ENE2016-76850-R
Tipo y forma: Artículo (PostPrint)
Área (Departamento): Área Máquinas y Motores Térmi. (Dpto. Ingeniería Mecánica)

Creative Commons Debe reconocer adecuadamente la autoría, proporcionar un enlace a la licencia e indicar si se han realizado cambios. Puede hacerlo de cualquier manera razonable, pero no de una manera que sugiera que tiene el apoyo del licenciador o lo recibe por el uso que hace. No puede utilizar el material para una finalidad comercial. Si remezcla, transforma o crea a partir del material, no puede difundir el material modificado.


Exportado de SIDERAL (2020-03-24-10:01:34)


Visitas y descargas

Este artículo se encuentra en las siguientes colecciones:
Artículos



 Registro creado el 2019-07-09, última modificación el 2020-03-24


Postprint:
 PDF
Valore este documento:

Rate this document:
1
2
3
 
(Sin ninguna reseña)