Characterization of thermophysical properties of phase change materials using unconventional experimental technologies

Martínez, A. ; Carmona, M. ; Cortés, C. (Universidad de Zaragoza) ; Arauzo, I. (Universidad de Zaragoza)

Resumen: The growing interest in developing applications for the storage of thermal energy (TES) is highly linked to the knowledge of the properties of the materials that will be used for that purpose. Likewise, the validity of representing processes through numerical simulations will depend on the accuracy of the thermal properties of the materials. The most relevant properties in the characterization of phase change materials (PCM) are the phase change enthalpy, thermal conductivity, heat capacity and density. Differential scanning calorimetry (DSC) is the most widely used technique for determining thermophysical properties. However, several unconventional methods have been proposed in the literature, mainly due to overcome the limitations of DSC, namely, the small sample required which is unsuitable for studying inhomogeneous materials. This paper presents the characterization of two commercial paraffins commonly used in TES applications, using methods such as T-history and T-melting, which were selected due to their simplicity, high reproducibility, and low cost of implementation. In order to evaluate the reliability of the methods, values calculated with the proposed alternative methods are compared with the results obtained by DSC measurements and with the manufacturer’s technical datasheet. Results obtained show that these non-conventional techniques can be used for the accurate estimation of selected thermal properties. A detailed discussion of the advantage and disadvantage of each method is given.

Idioma: Inglés

DOI: 10.3390/en13184687

Año: 2020

Publicado en: Energies 13, 18 (2020), 4687 [23 pp]
ISSN: 1996-1073

Factor impacto JCR: 3.004 (2020)

Categ. JCR: ENERGY & FUELS rank: 70 / 114 = 0.614 (2020) - Q3 - T2

Factor impacto SCIMAGO: 0.597 - Control and Optimization (Q2) - Electrical and Electronic Engineering (Q2) - Renewable Energy, Sustainability and the Environment (Q2) - Energy Engineering and Power Technology (Q2) - Fuel Technology (Q2) - Energy (miscellaneous) (Q2)

Tipo y forma: Article (Published version)

Área (Departamento): Área Máquinas y Motores Térmi. (Dpto. Ingeniería Mecánica)