Continuous selective deoxygenation of palm oil for renewable diesel production over Ni catalysts supported on Al2O3 and La2O3-Al2O3

Papageridis, K.N. ; Charisiou, N.D. ; Douvartzides, S. ; Sebastian, V. (Universidad de Zaragoza) ; Hinder, S.J. ; Baker, M.A. ; AlKhoori, A.A. ; AlKhoori, S.I. ; Polychronopoulou, K. ; Goula, M.A.

Resumen: The present study provides, for the first time in the literature, a comparative assessment of the catalytic performance of Ni catalysts supported on ¿-Al2O3and ¿-Al2O3modified with La2O3, in a continuous flow trickle bed reactor, for the selective deoxygenation of palm oil. The catalysts were preparedviathe wet impregnation method and were characterized, after calcination and/or reduction, by N2adsorption/desorption, XRD, NH3-TPD, CO2-TPD, H2-TPR, H2-TPD, XPS and TEM, and after the time-on-stream tests, by TGA, TPO, Raman and TEM. Catalytic experiments were performed between 300-400 °C, at a constant pressure (30 bar) and different LHSV (1.2-3.6 h-1). The results show that the incorporation of La2O3in the Al2O3support increased the Ni surface atomic concentration (XPS), affected the nature and abundance of surface basicity (CO2-TPD), and despite leading to a drop in surface acidity (NH3-TPD), the Ni/LaAl catalyst presented a larger population of medium-strength acid sites. These characteristics helped promote the SDO process and prevented extended cracking and the formation of coke. Thus, higher triglyceride conversions andn-C15ton-C18hydrocarbon yields were achieved with the Ni/LaAl at lower reaction temperatures. Moreover, the Ni/LaAl catalyst was considerably more stable during 20 h of time-on-stream. Examination of the spent catalysts revealed that both carbon deposition and degree of graphitization of the surface coke, as well as, the extent of sintering were lower on the Ni/LaAl catalyst, explaining its excellent performance during time-on-stream.

Idioma: Inglés

DOI: 10.1039/d0ra08541c

Año: 2021

Publicado en: RSC Advances 11, 15 (2021), 8569-8584
ISSN: 2046-2069

Factor impacto JCR: 4.036 (2021)

Categ. JCR: CHEMISTRY, MULTIDISCIPLINARY rank: 75 / 180 = 0.417 (2021) - Q2 - T2

Factor impacto CITESCORE: 5.9 - Chemical Engineering (Q2)

Factor impacto SCIMAGO: 0.667 - Chemistry (miscellaneous) (Q1) - Chemical Engineering (miscellaneous) (Q1)

Tipo y forma: Artículo (Versión definitiva)

Área (Departamento): Área Ingeniería Química (Dpto. Ing.Quím.Tecnol.Med.Amb.)