Environmental assessment of a new building envelope material derived from urban agriculture wastes: the case of the tomato plants stems
Llorach-Massana, Pere ; Cirrincione, Laura ; Sierra-Perez, Jorge (Universidad de Zaragoza) ; Scaccianoce, Gianluca ; La Gennusa, Maria ; Peña, Javier ; Rieradevall, Joan
Resumen: Purpose
Decarbonizing cities is one of today’s biggest challenges. In this regard, particular attention has been paid on improving the environmental performance of buildings. In this framework, this work consists in assessing the environmental impact of an innovative building envelope component derived from urban agriculture (UA) wastes. In fact, rooftop UA seems to be a possible solution to the rising food demand due to increasing urban demographic growth. Consequently, rooftop UA wastes need to be treated in sustainable ways.
Methods
This study aims to determine the carbon footprint and embodied energy of a new infill wall material, derived from UA wastes produced by a building rooftop greenhouse tomato crop, and evaluate the potential biogenic carbon that such by-product could fix temporally until its end of life. After an initial description of the manufacturing process of the new material, its carbon footprint and embodied energy have been calculated by means of the life cycle assessment (LCA) methodology according to the ISO 14044 and the ISO 14067 guidelines adapted to the analyzed context. In particular, the inventory analysis is based on data collected from the production of samples of the new material at the laboratory scale.
Results and discussion
The results of the LCA indicate that, when the biogenic carbon fixed in the UA wastes is considered, a negative carbon footprint of − 0.2 kg CO2 eq. per kg of material can be obtained. Hence, it can be assumed that from a life cycle perspective the material is able to fix carbon emissions instead of emitting them. Specifically, for the considered scenario, approximately 0.42 kg CO2 eq./m2 per year could be sequestered. However, the crop area required to produce enough waste to manufacture a unit of material is quite high. Therefore, future studies should focus on individuate solutions to reduce the density of the new component, and also different urban crops with higher waste production rates.
Conclusions
The outcomes of the study put in evidence the potential of the new proposed infill wall component in fixing carbon emissions from UA, allowing to also compensate those relating to the production and transportation stages of the component life cycle. Moreover, producing by-products with UA wastes, hence temporally storing the carbon fixed by crops, may contribute to reduce the carbon cycles speed conversely to traditional waste management solutions, other than lower new raw materials depletion.
Idioma: Inglés
DOI: 10.1007/s11367-023-02152-2
Año: 2023
Publicado en: International Journal of Life Cycle Assessment 28, 7 (2023), 813–827
ISSN: 0948-3349
Factor impacto JCR: 4.9 (2023)
Categ. JCR: ENVIRONMENTAL SCIENCES rank: 84 / 358 = 0.235 (2023) - Q1 - T1
Categ. JCR: ENGINEERING, ENVIRONMENTAL rank: 27 / 81 = 0.333 (2023) - Q2 - T2
Factor impacto CITESCORE: 10.6 - Environmental Science (all) (Q1)
Factor impacto SCIMAGO: 1.203 - Environmental Science (miscellaneous) (Q1)
Financiación: info:eu-repo/grantAgreement/ES/MINECO/CTM2013-17-47067-C2-1-R
Tipo y forma: Article (Published version)
Área (Departamento): Área Expresión Gráfica en Ing. (Dpto. Ingeniería Diseño Fabri.)
You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
Exportado de SIDERAL (2024-11-22-12:07:12)
Visitas y descargas
Decarbonizing cities is one of today’s biggest challenges. In this regard, particular attention has been paid on improving the environmental performance of buildings. In this framework, this work consists in assessing the environmental impact of an innovative building envelope component derived from urban agriculture (UA) wastes. In fact, rooftop UA seems to be a possible solution to the rising food demand due to increasing urban demographic growth. Consequently, rooftop UA wastes need to be treated in sustainable ways.
Methods
This study aims to determine the carbon footprint and embodied energy of a new infill wall material, derived from UA wastes produced by a building rooftop greenhouse tomato crop, and evaluate the potential biogenic carbon that such by-product could fix temporally until its end of life. After an initial description of the manufacturing process of the new material, its carbon footprint and embodied energy have been calculated by means of the life cycle assessment (LCA) methodology according to the ISO 14044 and the ISO 14067 guidelines adapted to the analyzed context. In particular, the inventory analysis is based on data collected from the production of samples of the new material at the laboratory scale.
Results and discussion
The results of the LCA indicate that, when the biogenic carbon fixed in the UA wastes is considered, a negative carbon footprint of − 0.2 kg CO2 eq. per kg of material can be obtained. Hence, it can be assumed that from a life cycle perspective the material is able to fix carbon emissions instead of emitting them. Specifically, for the considered scenario, approximately 0.42 kg CO2 eq./m2 per year could be sequestered. However, the crop area required to produce enough waste to manufacture a unit of material is quite high. Therefore, future studies should focus on individuate solutions to reduce the density of the new component, and also different urban crops with higher waste production rates.
Conclusions
The outcomes of the study put in evidence the potential of the new proposed infill wall component in fixing carbon emissions from UA, allowing to also compensate those relating to the production and transportation stages of the component life cycle. Moreover, producing by-products with UA wastes, hence temporally storing the carbon fixed by crops, may contribute to reduce the carbon cycles speed conversely to traditional waste management solutions, other than lower new raw materials depletion.
Idioma: Inglés
DOI: 10.1007/s11367-023-02152-2
Año: 2023
Publicado en: International Journal of Life Cycle Assessment 28, 7 (2023), 813–827
ISSN: 0948-3349
Factor impacto JCR: 4.9 (2023)
Categ. JCR: ENVIRONMENTAL SCIENCES rank: 84 / 358 = 0.235 (2023) - Q1 - T1
Categ. JCR: ENGINEERING, ENVIRONMENTAL rank: 27 / 81 = 0.333 (2023) - Q2 - T2
Factor impacto CITESCORE: 10.6 - Environmental Science (all) (Q1)
Factor impacto SCIMAGO: 1.203 - Environmental Science (miscellaneous) (Q1)
Financiación: info:eu-repo/grantAgreement/ES/MINECO/CTM2013-17-47067-C2-1-R
Tipo y forma: Article (Published version)
Área (Departamento): Área Expresión Gráfica en Ing. (Dpto. Ingeniería Diseño Fabri.)
You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. Exportado de SIDERAL (2024-11-22-12:07:12)
Permalink:
Visitas y descargas
Este artículo se encuentra en las siguientes colecciones:
Articles > Artículos por área > Expresión Gráfica de la Ingeniería
Record created 2023-05-25, last modified 2024-11-25