Characterization and Evaluation of an Electrostatic Knapsack Sprayer Prototype for Agricultural Crops

Vigo-Morancho, Alba (Universidad de Zaragoza) ; Videgain, María (Universidad de Zaragoza) ; Boné, Antonio (Universidad de Zaragoza) ; Vidal, Mariano (Universidad de Zaragoza) ; García-Ramos, Francisco Javier (Universidad de Zaragoza)

Resumen: Pesticide application development has grown exponentially in recent decades thanks to the implementation of new technologies and improved quality of spray input application. Electrostatic technology for increasing deposition has proven to be a suitable tool under specific study conditions, such as when working with very small droplet sizes, with air assistance, or typically in greenhouse environments. However, its effectiveness in hydraulic spraying, as well as its application from a commercial point of view in agriculture, is still challenging. The aim of this study was to evaluate the performance of this technology by implementing a modified lance on a small commercial knapsack sprayer, equipped with a hydraulic nozzle providing a range of droplet size values (Dv50) from 136 μm to 386 μm in the pressure range between 2 and 6 bar. This setup allowed operation under normal conditions (disconnected electrostatic system: NES) or with the connected electrostatic system (ES), with both configurations being tested in this study. Liquid distribution profiling as well as qualitative and quantitative evaluation of deposition were carried out both under laboratory conditions and in tomato crops under greenhouse conditions. The results showed no differences between the ES and NES in terms of flow rate (L min−1) characterization or in the total accumulated volume collected with the vertical bench. The impact of the electrostatic system connection was clearly observed in laboratory trials, with total deposition increases of up to 66%. In field trials, this effect decreased in unexposed areas and in denser sections of the crop. However, the overall increase in deposition, mainly associated with the exposed side, continued to be significant.

Idioma: Inglés

DOI: 10.3390/agronomy14102343

Año: 2024

Publicado en: Agronomy (Basel) 14, 10 (2024), 2343 [20 pp.]
ISSN: 2073-4395

Factor impacto JCR: 3.4 (2024)

Categ. JCR: AGRONOMY rank: 21 / 129 = 0.163 (2024) - Q1 - T1
Categ. JCR: PLANT SCIENCES rank: 68 / 273 = 0.249 (2024) - Q1 - T1

Factor impacto SCIMAGO: 0.744 - Agronomy and Crop Science (Q1)

Tipo y forma: Article (Published version)

Área (Departamento): Area Ingeniería Agroforestal (Dpto. CC.Agrar.y Medio Natural)
Área (Departamento): Área Ingeniería Mecánica (Dpto. Ingeniería Mecánica)
Área (Departamento): Área Expresión Gráfica en Ing. (Dpto. Ingeniería Diseño Fabri.)