Effect of syngas composition on the combustion and emissions characteristics of a syngas/diesel RCCI engine
Resumen: Reactivity controlled compression ignition (RCCI) strategy uses two different fuels with different reactivities which provides more control over the combustion process and has the potential to dramatically lower combustion temperature and NOX and PM emissions. The objective of the present study is to numerically investigate the impact of syngas composition on the combustion and emissions characteristics of an RCCI engine operating with syngas/diesel at constant energy per cycle. For this purpose, different syngas compositions produced through gasification process have been chosen for comparison with the simulated syngas (mixture of hydrogen and carbon monoxide). The results obtained indicate that using syngas results in more soot, CO and UHC emissions compared with simulated syngas. Even though more NOX reduction can be achieved while operating with syngas, the engine could suffer from poor combustion and misfire at low loads due to the presence of nitrogen in the mixture. In terms of exergy, both syngas mixtures lead to more exergy destruction by the increase of syngas substitution. Nevertheless, the magnitude of exergy destruction for simulated syngas is less than the normal syngas.
Idioma: Inglés
DOI: 10.3390/en13010212
Año: 2020
Publicado en: Energies 13, 1 (2020), 212 [19 pp]
ISSN: 1996-1073

Factor impacto JCR: 3.004 (2020)
Categ. JCR: ENERGY & FUELS rank: 70 / 114 = 0.614 (2020) - Q3 - T2
Factor impacto SCIMAGO: 0.597 - Control and Optimization (Q2) - Electrical and Electronic Engineering (Q2) - Renewable Energy, Sustainability and the Environment (Q2) - Energy Engineering and Power Technology (Q2) - Fuel Technology (Q2) - Energy (miscellaneous) (Q2)

Tipo y forma: Article (Published version)
Área (Departamento): Área Cienc.Mater. Ingen.Metal. (Dpto. Ciencia Tecnol.Mater.Fl.)

Creative Commons You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.


Exportado de SIDERAL (2021-09-02-09:08:43)


Visitas y descargas

Este artículo se encuentra en las siguientes colecciones:
Articles > Artículos por área > Ciencia de los Materiales e Ingeniería Metalúrgica



 Record created 2020-10-23, last modified 2021-09-02


Versión publicada:
 PDF
Rate this document:

Rate this document:
1
2
3
 
(Not yet reviewed)