Resumen: The incorporation of nanostructured materials, such as LTA-type zeolite on the silicon wafers, opens a very interesting door to the use of these materials within silicon based microfabrication technologies. This work studies the deposition and intergrowth of defect-free LTA-type zeolite layer onto 3-inch Silicon wafers with a layer of SiO2 subjected to pretreatment. The main disadvantage associated with zeolite layer synthesis are crack the formation of cracks and difficulty of obtaining a uniform layer. By modifying the supports with boehmite, a substantial improvement was observed in terms of layer continuity and crystal intergrowth in comparrison to coatings prepared on cationic polymer, poly (diallyldimethylammonium chloride). An LTA- type zeolite layer was synthesized in a range of 350 to 1300 nm via hydrothermal ex-situ method at 363 K for 12 h. Tetramethylammonium hydroxide (TMAOH) was used as a template, and aluminum isopropoxide and colloidal silica were used as Al and Si sources, respectively. Idioma: Inglés DOI: 10.17533/udea.redin.20200693 Año: 2020 Publicado en: Revista Facultad de Ingenieria-Universidad de Antioquia 101 (2020), 64-73 ISSN: 0120-6230 Factor impacto SCIMAGO: 0.16 - Engineering (miscellaneous) (Q4)